How to Apply:
USE ONLY AS A SPOT OR CRACK AND CREVICE APPLICATION. FOR SPOT APPLICATION:
Spot treatment is localized to a surface area not more than 0.2 m2. Spots are not to be adjoining and the combined area of spots is not to exceed 10% of the total surface area of a room.
FOR CRACK AND CREVICE APPLICATION:
Crack and crevice is an application directly into narrow openings on the surface of the structure. It does not include the treatment of exposed surfaces. Narrow openings typically occur at expansion joints, utility entry points and along baseboards and mouldings.
Application Instructions: SHAKE WELL BEFORE USE. HOLD CONTAINER UPRIGHT. APPLY IN SHORT BURSTS. Within the specified use location, to enhance effectiveness of this product, apply this product directly to the listed pest where possible.
INSTRUCTIONS FOR INSIDE BUILDINGS:
Spray small amounts of this product as a crack and crevice on spot application to indoor building surfaces, including dark corners of rooms; cracks and crevices in walls, floors and ceilings; along baseboards and door and window frames; around sinks; to walls behind and floors beneath appliances (e.g., stoves, refrigerators) and furniture (e.g., cabinets); around garbage cans, plumbing and other utility installations; around points of entry (e.g., windows, doors). For ants, also spray trails and nests. Treatment must only be repeated after 7 days if pest problem persists or reoccurs.
To Kill Brown Dog Ticks and Fleas: DO NOT SPRAY PETS WITH THIS PRODUCT. Only treat pets with products specifically registered for use on that type of pet. For effective flea and tick control, treatment of the pet should be combined with the cleanup and sanitation of any area used by the pet. Vacuum floors, carpets, furniture, etc. (discard vacuum bag after use) and wash the pet’s bedding, living quarters, and surrounding area. Apply to indoor building surfaces, including cracks and crevices in walls and floors, along and behind baseboards, window and door frames, and localized areas of floor and floor coverings. Pet bedding may be entirely treated with this product or replaced with clean, fresh bedding after other listed areas are treated. Treatment must only be repeated after 7 days if pest problem persists or reoccurs.
Killing Clothes Moths – infested garments may be treated by spraying garment in well ventilated/open area outside (NOT INDOORS). Lightly spray garment on both sides, let in drip dry fully dry. Then set garment aside and put in plastic bag overnight. Shake garment out over sink to dispose of larvae/eggs. Gentle wash garment in warm water and soap. Do not add bleach or any other agent/chemical. Optional drier or hang dry.
FOR OUTDOOR USE ON THE EXTERIOR SURFACES OF BUILDINGS AND ON PORCHES, PATIOS AND DECKS:
House Flies: For use as an aid in reducing nuisance from house flies. For use as a spot application to localized areas on the exterior surfaces of buildings (including garages) and localized areas on porches, patios and decks. Apply to the outside surfaces of foundations, under eaves troughs, around light fixtures, and places where insects enter (e.g., screens, doors, window frames). House Flies coming to rest on treated surfaces will be killed. Treatment must only be repeated after 14 days if pest problem persists or reoccurs.
ALWAYS READ THE LABEL CAREFULLY BEFORE USING PRODUCT.